Specifications
Two assembled handle blocks with bar (available in redwood or pine)
Sturdy construction, 4x6x8 main beam with 4x4 legs
All hardware included (hot-dipped galvanized)
3D illustrated step-by-step manual
*Lumber Not Inlcuded

*For Residential Use Only*

Soften the landing zones with a pair of Rubber Mats , made from dyed rubber chips, heat compressed and cut to 2'x2'x1", available in dark green or brick red.

Required Tools
Circular saw Electric drill w/ philips head bit 1 ¼" spade bit 7/16" standard drill bit 5/8" standard drill bit (6'x 6' forts) Socket wrench w/ 9/16" deep socket Hammer Vise grips Tape measure Combination square Extension cord Pencil Level	Safety, Finishing and Optional Tools Electric impact wrench w/ 9/16" deep socket Hand sander Router w/ round over bit Stain/waterproof sealer Saw horses Safety glasses Work gloves Dust Mask